
What Is the Difference Between Chlorhexidine Digluconate and Chlorhexidine Gluconate?
Reading time: 10 minutes
When searching for chemical raw materials, you may come across two names: chlorhexidine digluconate and chlorhexidine gluconate. Are they different compounds, or are the names used for the same ingredient?
In most chemical catalogs and supplier specifications, these names refer to the same chlorhexidine salt. Both are associated with CAS 18472-51-0, a molecular weight of approximately 897.8 g/mol, and the molecular formula C34H54Cl2N10O14. PubChem lists chlorhexidine digluconate as a synonym of chlorhexidine gluconate.
For buyers, the more important differences are often found in the product grade, solution concentration, testing method, and quality documentation rather than the name itself.
- Are Chlorhexidine Digluconate and Chlorhexidine Gluconate the Same?
- Chlorhexidine Digluconate vs. Chlorhexidine Gluconate: Key Data
- What Does 20% Chlorhexidine Gluconate Solution Mean?
- What Are the Applications of Chlorhexidine Gluconate?
- What Should Buyers Check Before Purchasing Chlorhexidine Gluconate?
- How to Compare Chlorhexidine Gluconate Suppliers
- Frequently Asked Questions

Are Chlorhexidine Digluconate and Chlorhexidine Gluconate the Same?
Yes, the two names generally refer to the same chemical salt.
Chlorhexidine is a bisbiguanide compound. When associated with two gluconate components, it forms chlorhexidine digluconate, also commonly called chlorhexidine gluconate or chlorhexidine bigluconate.
The prefix “di-” indicates two gluconate components in the salt composition. In commercial chemical listings, the shorter name may be used for convenience, while other suppliers use the more explicit name.
This naming difference does not, by itself, indicate a different active compound, a higher purity grade, or better performance.
However, buyers should not assume that every product listing is interchangeable without checking its documentation. A supplier may offer different concentrations, grades, or formulations under similar names. Always confirm the CAS number, stated concentration, and product specification before placing an order.
Chlorhexidine Digluconate vs. Chlorhexidine Gluconate: Key Data
The following table summarizes the main chemical information used to identify the compound.
| Property | Reference information |
|---|---|
| Common name | Chlorhexidine gluconate |
| Alternative name | Chlorhexidine digluconate |
| CAS number | 18472-51-0 |
| Molecular formula | C34H54Cl2N10O14 |
| Molecular weight | Approximately 897.8 g/mol |
| Salt composition | Chlorhexidine associated with two gluconate components |
| Common commercial form | Aqueous solution, including products labeled 20% w/v |
| Main identification check | CAS number and product specification |
Source: PubChem and Fisher Scientific product records.
The molecular weight is reported as approximately 897.8 g/mol, with Fisher Scientific listing 897.76 g/mol. The small difference reflects rounding.
These figures are useful when comparing supplier catalogs, preparing purchasing documents, or checking a product’s identity. However, they do not establish the concentration or purity of a specific commercial batch.
For that, buyers should refer to the supplier’s Certificate of Analysis (COA) and technical specification.
What Does 20% Chlorhexidine Gluconate Solution Mean?
Concentration is one of the most important points to check when purchasing chlorhexidine gluconate.
Commercial suppliers offer chlorhexidine digluconate in aqueous solutions, including products labeled 20% w/v. This is a concentration specification, not a different chemical name.
For a solution explicitly labeled 20% w/v, the concentration means 20 grams of the specified solute per 100 mL of final solution.
A simple comparison helps explain the difference:
| Label | Meaning |
|---|---|
| Chlorhexidine digluconate | Chemical name |
| CAS 18472-51-0 | Chemical identifier |
| 20% w/v solution | 20 g of specified solute per 100 mL of final solution |
| 0.2% w/v solution | 0.2 g of specified solute per 100 mL of final solution |
The last two entries are mathematical examples of concentration notation, not instructions for preparing a product or recommendations for use.
Also, do not assume that every product marked “20%” uses a weight-per-volume basis. A specification may use weight percentage, weight per volume, or another defined assay convention.
When comparing quotations, ask the supplier to confirm exactly how the concentration is expressed and how it is tested. This helps avoid comparing two products whose percentages are defined differently.
What Are the Applications of Chlorhexidine Gluconate?
Chlorhexidine gluconate is known for its antiseptic and antimicrobial properties. Depending on the product formulation and applicable regulations, it is used in areas such as oral care products, topical antiseptic formulations, and healthcare-related preparations.
Its positively charged structure contributes to its interaction with negatively charged microbial cell surfaces. This interaction can affect membrane integrity and lead to leakage of cellular contents.
However, the performance of a finished formulation depends on more than the ingredient name. Concentration, other formulation components, contact conditions, and the intended application can all influence the final product.
For manufacturers, it is therefore important to select a raw material that matches the intended formulation requirements. A concentrated raw material solution should not be treated as equivalent to a finished consumer or healthcare product.
For medical, oral care, and cosmetic applications, buyers must also check the applicable product-specific safety requirements and local regulatory standards.
What Should Buyers Check Before Purchasing Chlorhexidine Gluconate?
For B2B procurement, checking the chemical name is only the first step. A reliable purchasing decision also requires clear specifications and traceable quality records.
Confirm the product identity. Check that the supplier’s product name, CAS number, and specification are consistent. If the listing uses chlorhexidine gluconate while your purchasing document uses chlorhexidine digluconate, ask the supplier to confirm the intended material in writing.
Verify the concentration. Confirm whether the product is a concentrated aqueous solution and whether the percentage is stated as w/w, w/v, or another defined basis.
Review the COA. A batch-specific Certificate of Analysis should identify the material and relevant batch, state the agreed specification, and provide the applicable test results. Check the assay method and acceptance criteria rather than relying on a headline purity figure.
Request the SDS. A Safety Data Sheet provides information about hazards, handling, storage, and emergency precautions. It serves a different purpose from the COA.
Check packaging and supply arrangements. Confirm the available package sizes, storage conditions, shelf life where established, lead time, and shipping requirements. For repeat orders, discuss how batch identification and quality specifications will be maintained.
If your company purchases chlorhexidine gluconate regularly, keep the approved specification consistent across quotations, purchase orders, and incoming quality checks. This makes it easier to compare suppliers and investigate discrepancies.
How to Compare Chlorhexidine Gluconate Suppliers
A lower quotation does not always represent better value. The quoted products may differ in concentration, packaging, testing requirements, or documentation.
Before comparing prices, provide each supplier with the same purchasing requirements:
- Required chemical identity and CAS number
- Target concentration and assay basis
- Required COA and SDS
- Order quantity and packaging preference
- Delivery destination and expected schedule
Then compare the quotations against those requirements.
For buyers sourcing chlorhexidine gluconate CAS 18472-51-0, clear documentation is particularly important when the product name varies between supplier catalogs. A written specification helps both sides confirm that the quotation, sample, and commercial shipment refer to the intended material.
At Zhishang Bio, buyers can contact the team to discuss product specifications, available documentation, packaging, and supply options. Share your target concentration and required quantity to help the team assess your sourcing requirements.
FAQ
They generally refer to the same salt, CAS 18472-51-0. The difference is mainly in naming. Buyers should still check the product specification to confirm the grade, concentration, and formulation.
The molecular weight is approximately 897.8 g/mol. Reference databases and suppliers may report 897.76 g/mol or round it to 897.8 g/mol.
The commonly used CAS number is 18472-51-0. Confirm the CAS number alongside the chemical name and product specification when evaluating a supplier.
It identifies a concentration, but the percentage basis must be checked. For a solution labeled 20% w/v, it means 20 grams of the specified solute per 100 mL of final solution.
References article
- Pharmaceutical Raw Material Price Trends: What Buyers Need to Know in 2026
- How to Source Pharmaceutical Intermediates from China: A Complete Guide for Global Buyers
- Global API Market Trends 2026: What Pharmaceutical Buyers Need to Know
- API vs Pharmaceutical Intermediates: What’s the Difference?
- Why Are Prices of Pharmaceutical Intermediates So Different?
- 8 questions to understand before purchasing pharmaceutical intermediates
- What Is Chlorhexidine Digluconate? Properties, Uses, and Buying Guide
- Can I Use Chlorhexidine Mouthwash Every Day?
--We are zhishangbio Focusing on biochemicals --







Patents & Honors





Shandong Zhishang Bio Co., Ltd
Zhishang Bio, a subsidiary of Zhishang Chemical Co., Ltd., was established in 2016 and is a new type of chemical enterprise that integrates research and development, production, and sales. Zhishang Bio always adheres to the concept of “integrity management, strict quality control, customer first”.
Through continuous efforts, significant breakthroughs have been made in industries such as pharmaceutical intermediates, pesticide intermediates, food additives, and cosmetic raw materials. The domestic trade team sells well throughout the country, while the foreign trade team is exported to more than 30 countries and regions including the United States, Russia, Spain, Brazil, and enjoys a global reputation.
Invited to participate in this exhibition, Zhishang Bio will comprehensively showcase the company’s strength and achievements in the research and development, production, and quality control of pharmaceutical and pesticide intermediates! At that time, our company will set up an CPHI exhibition at booth E12D29 at the venue, and we will take you to further understand our company’s advantageous products in detail!





